Single suction centrifugal fire pump contains one impeller and a volute type casing, which is widely used in industrial and urban water supply and drainage, as well as agricultural drainage and irrigation, ect.

Single stage Pump Advantages:

● Directly coupled, vibration proof and low noise.
● Same diameter of inlet and outlet .
● C&U bearing ,which is the most famous brand in China.
● Circulating flow cooling ensure mechanical seal long life .
● Small foundation required that will saving construction investment by 40-60%.
● Excellent seal that is no leakage

Venturi Fire Pump Flow Meter is a flow meter with venturi type, used to determine the discharge of a fire pump. It’s widely used to measure the flow of single-phase stable fluid in closed pipelines, and in many energy and power industries, such as gas, electricity, cement, etc

Wet barrel fire hydrant is a fire hydrant used in places where the climate is mild and no danger of freezing weather. In water distribution pipe network, the fire hydrant system is always filled with water.

Dry barrel fire hydrant is a fire hydrant used in all climates, including where the freezing occurs. The fire hydrant system doesn’t filled with water unless fire occurs.

Wet pillar fire hydrant is a fire hydrant in column shape from below ground level, which used in places where the climate is mild and no danger of freezing weather. Generally, the column remains full of water.

Dry pillar fire hydrant is a fire hydrant in column shape from below ground level which used in all climates, including where the freezing occurs. The fire hydrant system doesn’t filled with water unless fire occurs.

Flowmeter for fire pump is mainly used to measure the volume flow of conductive liquid and slurry in closed pipes. Including acid, alkali, salt and other highly corrosive liquids.

Fire pump flowmeters may be used to determine the discharge of a fire pump. Water from the pump is temporarily directed through
the flowmeter, then to atmospheric drain or back to the water supply source.
It is important that the flowmeter not be connected directly back to the pump suction. This arrangement does not adequately test the
condition of the water supply.
These flowmeters are calibrated to measure the fire pump output directly in gal/min (dm3 /min). A control valve is provided in the
flowmeter line. This valve must be completely closed, except when the flowmeter is in use. Unless otherwise noted in the listing, these
systems have 175 psi (1205 kPa) rated working pressure.

Vertical Inline Centrifugal fire pump is a fire pump with special hydraulic and structural design, which is more suitable for building fire water supply system than ordinary centrifugal clean water pump.

Vertical inline centrifugal pumps are lightweight and compact with an upright design, ideal for smaller pump rooms and installations where space is confined. Due to their inline structure, these high performance single stage centrifugal pumps provide high-end liquid travel.